Henan Dorit Biotechnology Co., Ltd.
DORIT--do right
Add to Cart
LED Airotor Handpiece Fiber Optic Straight Handpiece
With Inner Water Spray
Fiber Optic Straight Handpieces Quick Details:
E-type straight dental handpiece 1:1 Ratio, with Internal Cooling System
Fiber optic light
Max. speed:40000rpm
ISO standard E-type connection
Fiber Optic Straight Handpieces Tech
| Product name | Fiber optic straight handpiece 1:1 |
| Material | Stainless steel |
|
Working air pressure |
0.3~0.35Mpa |
| Gear ratio | 1:1 |
| Max speed | 40000min/rpm |
| Noise | ≤50dB |
| Bur applicable |
Φ2.33~2.35mm |
| Connector | E-type |
| Fiber optic | with |
| Water spray |
Internal and external irrigation |
| Warranty Period | 1 year |
1:1 Fiber optic Straight Handpiece Features
1. German ceramic bearing, durable and long life
2. Turn the sleeve to take burs (counterclockwise 100° )
3. internal irrigation, better cooling
4. High precision gear low noise
5. ISO standard connector
6. High brightness fiber optic lighting
Product performance
| Chuck | The chuck must be applicable bur corresponding to IOS 1797-2Norms |
| Water and chip air supply | When air pressure is at 200kPa,water flow rate is not less than 50ML/min and air flow rate not less than 1.5L/min |
| Connector of handpiece | The structure, measurement and tolerance of back end of handpiece conform with YY1012 Norm. |
| Sterilization | Handpiece endure sterilization temperature at least 136℃ about 12 minutes once, for 250 times reuse without damage. |
| Temperature test | Under normal working conditions, the connected surface temperature rises less than 22℃ over ambient temperature. |
| Corrosion | There is no corrosion appearance after sterilization cycle. |
| Illumination electricity supply safety | Conforming with GB 9706.1-2007 Norm . |
Our services:
Pre-sale service:
1. 24 hours online, please feel free to contact us anytime.
2. Provide our customers best quality product.
3. High degree of expertise to solve any problems
After sale service:
1. Fast delivery with tracking number provided to make sure ou can receive your goods fast and safety.
2. Offer free warranty service.
3. Focus on every client's satisfaction. Professional team will solve any problems you may meet In the process of using.
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.
Operation Instruction:
It shall be sterilized before handpiece is used at the first time;sterilization temperature is 135ºC and last for 12 minutes.
After using,Please follow the instruction to sterilize the handpiece:
1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2 lubricate the handpiece,pour two drops into air tube one time.
3 wrap it with sterilization package and mark.