Henan Dorit Biotechnology Co., Ltd.
DORIT--do right
Add to Cart
Dorit Compatible NSK Type Quick Coupling Led Dental Optical
Fiber High Speed Handpiece
dental handpiece nsk
1.German spindle and bearing, great clamping force
2. New design of air-in system, better airflow
3. Fiber optic light, more brightness
4. Three water spraying outlets
5. Nsk handpiece 2 hole / 4 hole
Nsk handpiece Technical data:
| Products Name | High Speed Nsk Handpiece |
| Water Spray | Triple spray |
| Drive air pressure | 0.25-0.3Mpa |
| Water pressure | 0.2Mpa |
| Water pressure | 198Kpa(2kg) |
| Light brightness | 25500lux |
| Power | 22W |
| Rotation speed | 300,000~420,000rpm |
| Head height | 13.1mm |
| Head diameter | Φ11mm |
| Chuck type | Push button |
| Clamping force | 22N~34N |
| Torque force | 0.1N·cm |
| Bur Applicable | Φ1.59mm-Φ1.6mm*21mm-23mm(diameter*length) |
| Noise | ≤60DB |
Detailed photos:
|
Fiber optic light, great brightness Special design for easy holding |
|
3 water spray, ideal cooling effect |
|
NSK ype 6 holes ISO Standard quick coupling |
|
dental High Speed fiber optic turbine handpiece with NSK type 6 hole led coupling |
Company information
We are manufacturer for producing and supplying high speed dental handpiece , low speed dental handpiece, dental implant handpiece, endodontic files, and other relative dental instruments for many years .OEM & ODM orders are available , if you do not find the right items you are looking for,kindly please leave us message , we will reply you within 24hours .Thanks!
After each patient use , maintenance should be done as follows:
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate
2. Use a metal needle to clean the spray holes and fumaroles
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization